HTM 6 PP 3/4-HP Single Phase Motor
Magnesium Hydroxide Pumping using a Mag Drive Pump
The 33 GPM HTM 6 PP Magnetic Coupled centrifugal pump by Gemmecotti is a durable and efficient corrosion resistant pump made in thermoplastic polypropylene material. The HTM 6 PP-3/4-1PH pump is an ideal pump for difficult circulation pumping applications where corrosive or dangerous fluids are used and any leakage is a concern such as:
- Caustic Chemical pumping
- Ferric Chloride Pumping
- Alkali Transfer Pumping
- Electroplating Solutions
- Acids Pumping
The HTM6PP-3/4-1PH comes with a 3/4HP, Single Phase, 110 volt TEFC NEMA motor. The HTM Series are ideal as a circulation and transfer pumps for corrosive and damaging fluid pumping applications.
The unique design of a Magdrive Pump eliminates any chance for pump leakage. The internal magnets are mounted to a rotor which is coupled directly to the pump impeller and are sealed from the atmosphere by a protective shroud. The external magnets convey power to the internal magnets when the motor turns, through the protective shroud, which is stationary. Therefore, the pump is seal less and there is no chance of pump leakage making it ideal for corrosive or difficult pumping applications.
- Maximum Pump Flow 33 GPM
- Maximum Pump Temperature 140°F
- Maximum Pump Head 40 Ft.
- Maximum Pump Pressure 90 PSI
- Maximum Pump Viscosity 200 cSt.
- Pump Material Polypropylene
- Suction Connection 1" NPT FEMALE
- Discharge Connection .75" NPT MALE
- Motor Power 3/4 HP Single Phase
- O-ring Material EPDM
Complete pump unit price includes the pump, base plate, ANSI Flange set and 3/4 HP Motor (3500 RPM, 110v, 1PH, 60Hz, TEFC NEMA).
If you have any questions regarding the applications you require and their suitability with a Gemmecotti Pump, please feel free to contact our engineering support staff and they'll be glad to assist you with any question you may have.
SS316 options are available upon request.
PTFE O-rings are available upon request.