Home > HTM Series: 33-227 GPM > HTM Pump with 110V Motor >

HTM 50 PP 10-HP Single Phase Motor
Hydrochloric Acid Transfer Centrifugal Mag Drive Pump from GemmeCotti
Alternative Views:

Our Price: $11,110.00

Availability: Ships from Stock

Description Performance Curves Drawings

HTM 50 PP 10-HP Single Phase Motor

Mag Drive Pump for Hydrochloric Acid Pumping and Transfer

The 227 GPM HTM 50 PP Magnetic Coupled centrifugal pump by Gemmecotti is a durable and efficient corrosion resistant thermoplastic pump made in polypropylene material. It is coupled to a robust 10 HP, Single Phase, 110 Volt, Totally Enclosed, Fan Cooled NEMA motor. Our recommended pumping application for this pump is for Hydrochloric Acid Pumping and Transfer applications without suspended solids such as:

  • Acid Pumping
  • Corrosive Chemical Pumping
  • Calcium Hydroxide Pumping
  • Process Pumping Solutions
  • Clean Acids Pumping

The HTM50PP-10SGL is also an ideal pump for circulation pumping applications where corrosive and dangerous fluids are used and any pump leakage is a concern.

The unique design of a Magdrive Pump eliminates any chance for pump leakage. The internal magnets are mounted to a rotor which is coupled directly to the pump impeller and are sealed from the atmosphere by a protective shroud. The outer magnets are attached to a rotor which is mounted on the motor drive shaft. The external magnets convey power to the internal magnets when the motor turns, through the protective shroud, which is stationary. Therefore, the pump is seal less and there is no chance of pump leakage making it ideal for corrosive or difficult pumping applications.

  • Maximum Pump Flow 227 GPM
  • Maximum Pump Temperature 140°F
  • Maximum Pump Head 160 Ft.
  • Maximum Pump Pressure 90 PSI
  • Maximum Pump Viscosity 200 cSt.
  • Pump Material Polypropylene
  • Suction Connection 3" NPT Threaded MALE
  • Discharge Connection 2.5" NPT Threaded MALE
  • Motor Power 10 HP Single Phase
  • O-ring Material EPDM

Complete pump unit price includes the pump, base plate, ANSI Flange set and 10 HP Motor (3500 RPM, 110v, 1PH, 60Hz, TEFC NEMA).

If you have any questions regarding the applications you require and their suitability with a Gemmecotti Pump, please feel free to contact our engineering support staff and they'll be glad to assist you with any question you may have.

PTFE O-rings are available upon request.

Share your knowledge of this product. Be the first to write a review »