HTM 10 PP 1-HP Three Phase Motor
Mag Drive Pump for Seawater Pumping
The 66 GPM HTM 10 PP Magnetic Coupled centrifugal pump by Gemmecotti is a durable and efficient corrosion resistant thermoplastic pump made in polypropylene material. It is coupled to a robust 1 HP, Three Phase, 110 Volt, Totally Enclosed, Fan Cooled NEMA motor. Our recommended pumping application for this pump is for seawater pumping and transfer applications without suspended solids such as:
- Seawater Pumping
- Saltwater Pumping
- Saltwater Brine Transfer Pumping
- Brine Pumping Solutions
- Clean Seawater Pumping
The HTM10PP-1-3PH is also an ideal pump for circulation pumping applications where corrosive and dangerous fluids are used and any pump leakage is a concern.
The unique design of a Mag Drive pump eliminates any chance for pump leakage. The internal magnets are mounted to a rotor which is coupled directly to the pump impeller and are sealed from the atmosphere by a protective shroud. The outer magnets are attached to a rotor which is mounted on the motor drive shaft. The external magnets convey power to the internal magnets when the motor turns, through the protective shroud, which is stationary. Therefore, the pump is seal less and there is no chance of pump leakage making it ideal for corrosive or dangerous pumping applications.
- Maximum Pump Flow 66 GPM
- Maximum Pump Temperature 140°F
- Maximum Pump Head 62 Ft.
- Maximum Pump Pressure 90 PSI
- Maximum Pump Viscosity 200 cSt.
- Pump Material Polypropylene
- Suction Connection 1.5" NPT FEMALE
- Discharge Connection 1" NPT MALE
- Motor Power 1 HP Three Phase
- O-ring Material EPDM
Complete pump unit price includes the pump, base plate, ANSI Flange set and 1 HP Motor (3500 RPM, 110v, 3PH, 60Hz, TEFC NEMA).
If you have any questions regarding the applications you require and their suitability with a Gemmecotti Pump, please feel free to contact our engineering support staff and they'll be glad to assist you with any question you may have.
SS316 options are available upon request.
PTFE O-rings are available upon request.