Home > HTM Series: 33-227 GPM > HTM Pump with 230/460V Motor >

HTM 50 PVDF 10-HP Three Phase Motor
Mag Drive Centrifugal Pump for clean acids and corrosive liquids
 
Alternative Views:


Our Price: $13,810.00

Availability: Ships from Stock
Qty:

Description Performance Curves Drawings
 

HTM 50 PVDF 10-HP Three Phase Motor

Mag Drive Pump for Acid-Resistant Applications

The 227 GPM GHTM 50 PVDF Magnetic Coupled centrifugal pump by Gemmecotti is a durable and efficient corrosion resistant pump made in thermoplastic polyvinylidene fluoride material. It is coupled to a robust 10 HP, Three Phase, 110 Volt, Totally Enclosed, Fan Cooled NEMA motor. Our recommended pumping application for this pump are for industries using Highly-Corrosive Acid pumping applications without suspended solids such as:

  • Muriatic Acids
  • Nitric Acids
  • Sulfuric Acids
  • Chrome-Plating Acid Applications
  • Clean-Flow Chemical Pumping

The GHTM50PV-10-3PH is also an ideal pump for circulation pumping applications where corrosive and dangerous fluids are used and any pump leakage is a concern.

The unique design of a Magdrive Pump eliminates any chance for pump leakage. The internal magnets are mounted to a rotor which is coupled directly to the pump impeller and are sealed from the atmosphere by a protective shroud. The outer magnets are attached to a rotor which is mounted on the motor drive shaft. The external magnets convey power to the internal magnets when the motor turns, through the protective shroud, which is stationary. Therefore, the pump is seal less and there is no chance of pump leakage making it ideal for corrosive or difficult pumping applications.

  • Maximum Pump Flow 227 GPM
  • Maximum Pump Temperature 194°F
  • Maximum Pump Head 160 Ft.
  • Maximum Pump Pressure 90 PSI
  • Maximum Pump Viscosity 200 cSt.
  • Pump Material Polyvinylidene Fluoride
  • Suction Connection 3" NPT MALE
  • Discharge Connection 2.5" NPT MALE
  • Motor Power 10 HP Three Phase
  • O-ring Material VITON

Complete pump unit price includes the pump, base plate, ANSI Flange set and 10 HP Motor (3500 RPM, 110v, 3PH, 60Hz, TEFC NEMA).

If you have any questions regarding the applications you require and their suitability with a Gemmecotti Pump, please feel free to contact our engineering support staff and they'll be glad to assist you with any question you may have.

PTFE O-rings are available upon request.


Share your knowledge of this product. Be the first to write a review »