Home > HTM Series: 33-227 GPM > HTM Pump with 110V Motor >

HTM 10 PVDF 1.5-HP Single Phase Motor
Organic and Inorganic Surface Coatings using a Mag Drive Centrifugal Pump from GemmeCotti
Alternative Views:

Our Price: $2,907.00

Availability: Ships from Stock

Description Performance Curves Drawings

HTM 10 PVDF 1.5-HP Single Phase Motor

Mag Drive Pump for Surface Coatings

The 66 GPM GHTM 10 PVDF Magnetic Coupled centrifugal pump by Gemmecotti is a durable and efficient corrosion resistant pump made in thermoplastic polyvinylidene fluoride material. It is coupled to a robust 1.5 HP, Single Phase,110 Volt, Totally Enclosed, Fan Cooled NEMA motor. Our recommended pumping application for this pump is for Surface coating applications within the bottling industry without suspended solids such as:

  • Functional Polymer Pumping
  • Organic Glass Coating Solutions
  • Hydrophobic Coatings
  • Surface Coatings
  • Clean-Flow Chemical Pumping

The GHTM10PV-1.5SGL is also an ideal pump for circulation pumping applications where corrosive and dangerous fluids are used and any pump leakage is a concern.

The unique design of a Magdrive Pump eliminates any chance for pump leakage. The internal magnets are mounted to a rotor which is coupled directly to the pump impeller and are sealed from the atmosphere by a protective shroud. The outer magnets are attached to a rotor which is mounted on the motor drive shaft. The external magnets convey power to the internal magnets when the motor turns, through the protective shroud, which is stationary. Therefore, the pump is seal less and there is no chance of pump leakage making it ideal for corrosive or difficult pumping applications.

  • Maximum Pump Flow 66 GPM
  • Maximum Pump Temperature 194°F
  • Maximum Pump Head 62 Ft.
  • Maximum Pump Pressure 90 PSI
  • Maximum Pump Viscosity 200 cSt.
  • Pump Material Polyvinylidene Fluoride
  • Suction Connection 1.5" NPT FEMALE
  • Discharge Connection 1" NPT MALE
  • Motor Power 1.5 HP Single Phase
  • O-ring Material VITON

Complete pump unit price includes the pump, base plate, ANSI Flange set and 1.5 HP Motor (3500 RPM, 110v, 1PH, 60Hz, TEFC NEMA).

If you have any questions regarding the applications you require and their suitability with a Gemmecotti Pump, please feel free to contact our engineering support staff and they'll be glad to assist you with any question you may have.

SS316 options are available upon request.

PTFE O-rings are available upon request.

Share your knowledge of this product. Be the first to write a review »