Home > HTM Series: 33-227 GPM > HTM Pump with 230/460V Motor >

HTM 31 PVDF 5-HP Three Phase Motor
GemmeCotti HTM31 PVDF -5 HP-SGL-Phase
 
Alternative Views:


Our Price: $6,299.00

Availability: Ships from Stock
Qty:

Description Performance Curves Drawings
 

HTM 31 PVDF 5-HP Three Phase Motor

Mag Drive Pump for Feed and Metering Pumping

The 180 GPM HTM 31 PVDF Magnetic Coupled centrifugal pump by GemmeCotti is a durable and efficient corrosion resistant pump made in thermoplastic polyvinylidene fluoride material. It is coupled to a robust 5 HP, Three Phase, 110 Volt, Totally Enclosed, Fan Cooled, NEMA motor. Our recommended pumping application for this pump is chemical feed and metering applications such as:

  • Wastewater Pumping
  • Greywater Pumping
  • Hydrophobic Coatings
  • Surface Coatings
  • Spray Coating Systems

The GHTM31PV-5-3PH pump is also an ideal pump for circulation pumping applications where corrosive and dangerous fluids are used and any pump leakage is a concern.

The unique design of a Mag Drive pump eliminates any chance for pump leakage. The internal magnets are mounted to a rotor which is coupled directly to the pump impeller and are sealed from the atmosphere by a protective shroud. The outer magnets are attached to a rotor which is mounted on the motor drive shaft. The external magnets convey power to the internal magnets where the motor turns, through the protective shoud, which is stationary. Therefore, the pump is seal less and there is no chance of pump leakage making it ideal for corrosive and dangerous pumping applications.

  • Maximum Pump Flow 180 GPM
  • Maximum Pump Temperature 194°F
  • Maximum Pump Head 113 Ft.
  • Maximum Pump Pressure 90 PSI
  • Maximum Pump Viscosity 200 cSt.
  • Pump Material Polyvinylidene Fluoride
  • Suction Connection 2" NPT Threaded FEMALE
  • Discharge Connection 1.5" NPT Threaded MALE
  • Motor Power 5 HP Three Phase
  • O-ring Material VITON

Complete pump unit price includes the pump, base plate, ANSI flange set and 5 HP Motor (3500 RPM, 110v, 3PH, 60Hz, TEFC NEMA).

If you have any questions regarding the applications you require and their suitability with a Gemmecotti Pump, please feel free to contact our engineering support staff and they'll be glad to assist you with any question you may have.

SS316 options are available upon request.

PTFE O-rings are available upon request.


Share your knowledge of this product. Be the first to write a review »